View source for 1098326

 '''Final SB  ID=500  -> merge ID=200 & ID=300 & TS ID=2 plate 11 to 1'''
 '''b098326.0.1.500.stopping_point.txt'''
 '''TS from plate 57 to 29 :  98326.plate.81.4000.cp.root  in dset_TS'''

CS Pred 2 & 8 has been confirmed by manual check on plate 57

[[Image:Event.png]]




* '''Scanback (ID=100 & ID=200)'''

Pred 2 followed till plate 47
Pred 8 followed till plate 55


* '''TotalScan ID=1000'''

 Pred 2 : done from plate 53 to plate 42  (1.2x1.2 cm2)
         Track reconstructed from plate 53 to 47
         Fedra vtx search : nothing
         Ariga-San display shows scattering -> try to follow the "new" track

 [[Image:Sbtrk2 x.gif]]  [[Image:Sbtrk2 y.gif]]

         new pred:   ID=21  pl 43 :   60208.80   43129.95   0.1099   0.1992
                     ID=22  pl 46 :   60740.25   43956.61   0.1462   0.2188
         -> 21 & 22 are same BT on plate 43


 Pred 8 : done from plate 57 to plate 50  (1.2x1.2 cm2)
         Track not reconstructed but BT found in CP files from plate 57 to 55
         Fedra vtx search : of course nothing
         Ariga-San display shows also scattering -> try to follow the "new" track

 [[Image:Sbtrk8 xview.gif]]  [[Image:Sbtrk8 yview.gif]]


         new pred:  ID=81 pl 54   : 30050.46    29953.10  -0.0423   0.0175 
         

* '''New SB (ID=300)'''

 Follow pred 81,21,22

         '''On plate 54, pred 81 found & also a MT on top with the same slope and position as the predicted BT from pred ID=8 !!!!'''

[[Image:Image1.png]]

 Pred 81, MT BOT OK but MT top FAKE    &  MT TOP found with seems to correspond to CS Pred 8


[[Image:Mt found near pred id81 pl54.png]]


For info :  CS pred 8 on plate 54 :  30058.69    29934.06  -0.1423  -0.0982



* Pred 81 stops at plate 42
 '''New TotalScan  ID=3000'''
 from pl 47 to pl 37 -> for Pred 81   (problem pl 45 like Peanut 2) :  '''STOP TS ID=3000 at plate 40 because fake stop''' -> continue SB ID=300


* ''' SB ID=300'''

 ID=81:
 From plate 40 to 37, ID=81 not so clear, but nice on plate 36 & good plate 35  -> ID=81 stopped at plate 35 
 -> continue TS ID=3000 from plate 39 to 30
 '''CONFIRMED STOP at plate 35  :-('''
 (Remark BT found on plate 31 during SB is fake)


 ID=22:
 SB stopped at plate 38
 -> TS ID=3000 of Pred ID=22 from pl 43 to 30  1.1x1.1 cm2 using intercalib from TS ID=81
 On CP file plate 37 -> BT candidate  -> confirmed BUT 40 mrad in TX and 20 mrad in TY scattering
 Pred 22 -> X=59233, Y=41583, TX=0.0724, TY=0.1800
 -> '''FAKE STOP'''  track continue till plate 30
 -> CONTINUE SB ID=300

* SB ID=300, Pred 22
 Passing through


* TS ID=4000 from plate 43 to plate 29 using pred ID=81   with higher cutoff -> increase efficiency -> find muon ?
 Re check light : 29050 ->  28460
 CutOff 1  1250 -> 1200
 CutOff 2  1250 -> 1200
 directory :   dset_TS_81_stp_point
 Candidate Plate 32, try to follow it : 98326.1.32.310.pred.root -> FAKE
 '''MUON found''' -> Vertex 2 prong found     Muon on plate 43 : 10    35619.98    29058.14   0.3910  -0.0922 0

 Continue TS from plate 44 to 49 -> ID=4000, version=81 -> b098326.0.81.4000.operation.h






* TS from plate 57 to 50   ID=5000  -> b098326.0.1.400.operation.h
 TS will be done as intercalibration , so create new pred file at plate without CS pred ID=2  -> 98326.57.1.400.pred.root
 -> to run  scan5000.x
 directory : dset_TS_plate_57_50_2x2cm2


* TS from plate 57 to 50, ID=6000 -> b098326.0.1.500.operation.h
 -> 98326.57.1.400.pred.root
 1.6x1.6 cm2
 changed in VS5   Z threshold 100->200 and thickness 30->27




* dset
 dset_TS_2                      : 1st TS Pred ID=2, plate 53 to 42 -> no confirmed stop of CS Pred ID=2, files=98326.plate.2.1000.cp.root
 dset_TS_22                     : Last TS of Pred ID=22, plate 21 to 1 -> Passing through. files=98326.plate.22.3000.cp.root
 dset_TS_22_plate43to31         : TS of Pred ID=22, plate 43 to 30 -> no confirmed stop of Pred ID=22, files=98326.plate.22.3000.cp.root
 dset_TS_8                      : 1st TS Pred ID=8, plate 57 to 50 -> no confirmed stop of CS Pred ID=8, files=98326.plate.8.1000.cp.root
 dset_TS_81_3000                : TS of Pred ID=81, plate 47 to 31 (stopping point at plate 35), files=98326.plate.81.3000.cp.root -> Confirme stop ?
 dset_TS_81_stp_point           : redo TS with lower cutoff of Pred ID=81, plate 43 to 29 , files=98326.plate.81.4000.cp.root
 dset_TS_plate_57_50_2x2cm2     : TS near 2x2 cm2, plate 57 to 50, all predictions except 2, try to reconstruct secondary interaction on plate 54, files=98326.plate.1.5000.cp.root
 dset_TS_plate_57_50_1.6x1.6cm2 : TS 1.6x1.6 cm2 same as previous but change settings VS5 about thickness, files=98326.plate.1.6000.cp.root



OLD

No coscmics => Lateral marks

In X-marks frame:

Corners: -314,-665, 124848, 98789.9,

Marks:  119991.6, 96203.5, 119995.7, 1477.6

This means second lateral mark from the left side (with round hole) in emulsion.
test