Server Config

Bern Atlas Server setup and configuration info. === NOTE: this page is OBSOLETE and NO LONGER MAINTAINED. ===

LHEPLSW1 (130.92.139.201)

Brocade FCX648 48-port switch. Access here. Port config:

   Trunk Id 5: 1/1/5, 1/1/6, 1/1/7, 1/1/8 to dpmdisk01.lhep
   Trunk Id 9: 1/1/9, 1/1/10, 1/1/11, 1/1/12 to dpmdisk02.lhep
   Trunk Id 13: 1/1/13, 1/1/14, 1/1/15, 1/1/16 to dpmdisk03.lhep
   Trunk Id 25: 1/1/25, 1/1/26 to dpmdisk04.lhep
   Trunk Id 27: 1/1/27, 1/1/28 to lheppc7
   Trunk Id 31: 1/1/31, 1/1/32 to kvm02.lhep
   Trunk Id 33: 1/1/33, 1/1/34 to lheppc1
   Trunk Id 35: 1/1/35, 1/1/36 to lheppc4

LHEPPC44 (130.92.139.94, manage=?, RAID at21=.221) - Dalco

- SLC5.7, installed as of Jun 3rd, 2011

- LDAP server

- Areca 1680 8 port controller

 - Unit 0 160 GB (/dev/sda)
   2 x 160GB ports 0-1, RAID 1
   120 GB /
   250 MB /boot
    16 GB swap

- Unit 1 4TB (/dev/sdb)
   6 x 1TB ports 2-7, RAID 6
   4 TB /terabig

 Exports:
  - /terabig

 Remote Management module has no IP yet

 RAID card connect to http://lhepat21.unibe.ch:888 (admin/0000)

- The following works too: In order to start the web interface, to configure/fix something on the Areca RAID card:

as user root: /root/archttp64 <PORT> (admin/0000)
/root/arc/x86-64/archttp64 9876

where you replace <PORT> with a number between 1024 and 56535, eg. take 9876 then go to a web browser and enter: https://lheppc44.unibe.ch:9876/ (default is 81 for the controller, 82 for the configuration manager)

LHEPPC1 (130.92.139.51) - DELL PowerEdge R410

- 8-core with hyper-threading (16 CPUs), 64 GB RAM

- eth0 and eth1 bonded to bond0

- DELL PERC H200 4-port controller

 - Unit 1 250 GB (/dev/sda)
   2 x 250 GB ports 0-1, RAID 1
   100 MB /boot
    50 GB swap
    95 GB /
    87 GB free

 - Unit 2 3.7 TB (/dev/sdb)
   2 x 2 TB ports 2-3, RAID 0
   3.7 TB /mnt/storage1 (/scratch)

LHEPPC7 (130.92.139.57, manage pc4=.54, raid at20=.220)

- 8-core, 24 GB RAM

- eth0 and eth1 bonded to bond0

- management interface is lheppc4 (ATLAS root login)

- LDAP replica server

- Areca 1231 24 port controller

 - Unit 0 250 GB (/dev/sda)
   2 x 250 GB ports 0-1, RAID 1
   200 MB /boot
    50 GB swap
   180 GB /

- Unit 1 40 TB (/dev/sdb)
   22 x 2 TB ports 2-23, RAID 6
   40 TB /ngse5

 Exports:
  - /ngse5

 RAID card connect http://130.92.139.220:888 (admin/0000)

lheppc10

- SuSE

- cfengine master machine

- Use yast on pc10 to configure the LDAP users

"Old PC50" IS NOW PART OF ce.lhep.unibe.ch

- 3Ware-9500 12 port Controller 0

 - Unit 0 75GB (/dev/sda)
   2 x 80GB ports 0-1
   RAID-1
   58 GB sda3 /

 - Unit 1 3.7 TB (/dev/sdb)
   9 x 500 GB ports 2-10 
   RAID-5
   3.7 TB sdb1 /data0

 - HotSpare port 6 500GB

- 3Ware-9500 12 port Controller 0

 - Unit 0 4.6 TB (/dev/sdc)
   11 x 500 GB ports 0-10 
   RAID-5
   4.6 TB sdc1 /data1

 - HotSpare port 11 500GB

LHEPPC51 (130.92.139.151) - DEPRECATED, now DPMDISK04.LHEP

- SL 4.5, 2.6.9-55.EL.cernsmp, gcc 3.4.6 20060404

- Do not use the on-board sata raid...

- 3Ware-RAID-Config

 Administrator login with root pw.
 User is the standard 3ware pw.

- 3Ware 9650, 24 port, Controller 6

 - Unit 0 (dev/sda)
   24 ports 0-23, 24 2 TB Drives
   RAID-6
   ~40 TB /ngse3  (/dev/sda1)

- 3Ware-9650 16 port, Controller 7

 - Unit 0 75GB (/dev/sdb)
   2 x 80 GB ports 0-1
   RAID-1
   100 MB sdb1 /boot
    58 GB sdb2 /
    16 GB sdb3 swap

 - Unit 1 22 TB (/dev/sdc)
   14 x 2 TB ports 2-15
   RAID-6
   22 TB /ngse4 (dev/sdc1, xfs)

- EXPORTS: /ngse3, /ngse4 - Not anymore

- Bonding of eth0 and eth1 (admin how-to)

LHEPLIN0 - DEPRECATED

A Dell 2724 (burehof). Access here.

This is the 24 port switch.

Port config: Port 14 and 16 are trunked (LAG 1) for lheppc51 Port 11 and 12 are trunked (LAG 2) for lheppc7 Port 13: management for lheppc7 (lheppc4 address)