1032385

Start

• corner & marks

Top-Right position:
corner_minx = -76
corner_miny = -545
Bottom-Left position:
corner_maxx = 125002
corner_maxy = 98957
1st mark (10000, 10000)
mark1_x = 9847
mark2_y = 9673
2nd mark (10000, 90000)
mark2_x = 9752
mark2_y = 89900
3rd mark (115000, 90000)
mark3_x = 115030
mark3_y = 90045

• tune thresholds

edit odyssey
test - should have around 1600 clusters

• scanning parameter

camera exposure time: 1/748
light: 29960
cutoff 1: 1130 -> 1000
cutoff 2: 910 -> 850

Shift intercalibration area

shift the intercal area in order to be where the two tracks meet to save the totalscan. to do so, plate 37 was scanned with the old intercal area and was intercallibrated, then scanned again with the new one, not intercalibrated to 38 (it already exists from the old one) and then plate 36 intercalibrated with the new 37.

cp al *10* numbers to *_save in 37 (and also the pred in 38)
create prediction in plate 38

root [0] EdbScanProc sproc
root [1] EdbPattern pred                           
root [2] pred.AddSegment(1,105669,67713,0.0,0.0,32)
(class EdbSegP*)0x1fecf000
root [3] int id[4]={32385,38,1,10}                 
root [5] sproc.eProcDirClient="/terabig/scan/MICROSCOPE2/ONLINE"
(class TString)"/terabig/scan/MICROSCOPE2/ONLINE"
root [6] sproc.WritePred(pred,id)                               
WritePatRoot    : /terabig/scan/MICROSCOPE2/ONLINE/b032385/p038/32385.38.1.10.pred.root with 1 predictions with flag: -1
(int)1
root [7] sproc.WritePatTXT(pred,id,"man.pred.txt")
WritePatTXT     : /terabig/scan/MICROSCOPE2/ONLINE/b032385/p038/32385.38.1.10.man.pred.txt with 1 predictions with flag: -1
(int)1
root [8]

some temporary stuff

Path 6: Prediction: 104321.500000 66661.648438 0.006781 -0.172309

 Status 0: BT found
 BT :   104321.2    66654.9     0.0076    -0.1676    24     0.2536 0.000000
 Res:       -0.3       -6.7     0.0008     0.0047
 MT1:   104322.0    66637.0     0.0011    -0.1431    12     0.7717 0.000000
 Res:        0.5      -24.7    -0.0057     0.0292
 MT2:   104320.4    66672.9     0.0031    -0.1492    12     0.6217 0.000000
 Res:       -1.1       11.2    -0.0037     0.0232
 Preliminary (BT,MT1,MT2) = (1,3,3)
 Candidates  (BT,MT1,MT2) = (1,1,1)

Path 8: Prediction: 105881.750000 68806.968750 0.217564 0.090975

 Status -1: Nothing found
 Preliminary (BT,MT1,MT2) = (0,2,3)
 Candidates  (BT,MT1,MT2) = (0,0,0)

WritePatRoot  : /terabig/scan/MICROSCOPE2/ONLINE/b032385/p034/32385.34.1.100.found.root with 2 predictions with flag: -1 WritePatTXT  : /terabig/scan/MICROSCOPE2/ONLINE/b032385/p034/32385.34.1.100.man.found.txt with 2 predictions with flag: -1

1. 1. 1. 1. Found a MT1!!!!!!!!!!!!!!!!!

ID = (32385.30.1.100). You searched for 2 paths Path 6: Prediction: 104329.164062 67403.156250 0.012528 -0.171758

 Status 0: BT found
 BT :   104331.1    67394.9     0.0125    -0.1690    21     0.2374 0.000000
 Res:        1.9       -8.3    -0.0000     0.0027
 MT1:   104332.4    67376.8     0.0153    -0.1427     8     0.7337 0.000000
 Res:        3.3      -26.4     0.0028     0.0290
 MT2:   104329.8    67412.9    -0.0022    -0.1504    13     0.7335 0.000000
 Res:        0.6        9.8    -0.0147     0.0214
 Preliminary (BT,MT1,MT2) = (1,3,2)
 Candidates  (BT,MT1,MT2) = (1,0,1)

Path 8: Prediction: 104880.078125 68174.781250 0.208025 0.104323

 Status 1: MT1 (top) found
 MT1:   104908.2    68182.2     0.1824     0.0949    10     0.6667 0.000000
 Res:       28.1        7.5    -0.0256    -0.0094
 Preliminary (BT,MT1,MT2) = (0,1,0)
 Candidates  (BT,MT1,MT2) = (0,1,0)

ID = (32385.29.1.100). You searched for 2 paths Path 6: Prediction: 104269.328125 67713.023438 0.012997 -0.168106

 Status 0: BT found
 BT :   104264.0    67707.4     0.0135    -0.1678    25     0.2485 0.000000
 Res:       -5.4       -5.6     0.0005     0.0003
 MT1:   104265.4    67689.4     0.0089    -0.1477    10     0.6177 0.000000
 Res:       -3.9      -23.6    -0.0041     0.0204
 MT2:   104262.5    67725.3     0.0070    -0.1440    15     0.7046 0.000000
 Res:       -6.8       12.3    -0.0060     0.0241
 Preliminary (BT,MT1,MT2) = (1,2,2)
 Candidates  (BT,MT1,MT2) = (1,1,1)

Path 8: Prediction: 104574.398438 68134.046875 0.205939 0.107137

 Status -1: Nothing found
 Preliminary (BT,MT1,MT2) = (0,1,3)
 Candidates  (BT,MT1,MT2) = (0,0,0)

scanback trace

the signal of the scanback track was very weak. sometimes there was nothing found or just a microtrack. i went to manually check on almost all the plates and confirmed the track manually, most the time a basetrack even tough only a microtrack was found. tracks up to plate 30 are reliably there (no doubt) even if not found with scanback. once i even had to extend the number of holes in order to not loose the manually confirmed track.

because of this weak singal, i did change (lower) thresholds from time to time in the hope to pic up a signal. at plate 26, i adjusted again light and thresholds for the totalscan volume (which correspons to the intercalibration area).

Scanforth

out of the event viewer of ariga

track plate X Y TX TY
4035 29 104198 68422 -0.050 0.139 (scanforth_29, RUN number 200)
4035 30 104121 68623 -0.053 0.176 (scanforth_30, RUN number 300)
1524 30 104326 68120 -0.010 -0.007 (scanforth_30, RUN number 300)
4383 31 104806 68203 0.126 -0.001 (scanforth_31, RUN number 400)

TRACK BEFORE THE VERTEX

1524 26 104326 68153 -0.007 -0.025
***********************************************************************************************
*    Row   * Instance *        eX *        eY *       eTX *       eTY * 28+(eZ+38 *      s.eW *
***********************************************************************************************
*     1524 *        0 * 104309.79 * 68111.601 * 0.0018862 * 0.0360091 * 24.005132 *        20 *
*     1524 *        1 * 104328.64 * 68127.656 * -0.013340 * 0.0112925 * 24.998617 *        22 *
*     1524 *        2 * 104326.38 * 68153.015 * -0.007221 * -0.024979 * 26.013707 *        18 *
*     1524 *        3 * 104326.88 * 68119.968 * -0.009976 * -0.007628 * 29.993587 *        21 *
***********************************************************************************************

• check manually the segmetns of the track upstream
• create prediction for those 3 tracks downstream

TS - CP-file crosscheck

track 6

plate 29 30 31 32 33 
SB    ok ok x  ok x
TS    ok ok x  ok x

track 8

plate 29 30 31 32 33 
SB    x  ok ok x  ok
TS    x  x  x  x  x

plate 29

track 6 SB: found, TS: found (tolerance: 10 micron, 10 mrad)
************************************************************************************************
*    Row   *      s.eX *      s.eY *     s.eTX *     s.eTY *     s.eID *      s.eW *   s.eChi2 *
************************************************************************************************
*   110398 * 104264.65 * 67701.359 * 0.0122663 * -0.166435 *    110398 *        25 * 0.3680135 *
************************************************************************************************
track 8 SB: NOT found, TS: NOT found (tolerance: 200 micron, 50 mrad)

plate 30

track 6 SB: found, TS: found (tolerance: 10 micron, 10 mrad)
6   104325.52    67406.23   0.0129  -0.1681 0 
************************************************************************************************
*    Row   *      s.eX *      s.eY *     s.eTX *     s.eTY *     s.eID *      s.eW *   s.eChi2 *
************************************************************************************************
*    97120 * 104325.98 * 67399.187 * 0.0117552 * -0.162711 *     97120 *        19 * 0.5760690 *
************************************************************************************************
track 8 NOT found (tolerance: 100 micron, 50 mrad)

plate 31

track 6 SB: NOT found, TS: NOT found (tolerance: 100 micron, 10 mrad)
track 8 SB: found, TS: NOT found (tolerance: 200 micron, 20 mrad)

plate 32

track 6 SB: found, TS:  found (tolerance: 10 micron, 10 mrad)
************************************************************************************************
*    Row   *      s.eX *      s.eY *     s.eTX *     s.eTY *     s.eID *      s.eW *   s.eChi2 *
************************************************************************************************
*    85848 * 104258.23 * 67136.171 * 0.0098933 * -0.175671 *     85848 *        20 * 0.7778653 *
************************************************************************************************
track 8 SB: NOT found, TS: NOT found (tolerance: 200 micron, 20 mrad)

plate 33

track 6 SB: NOT found, TS: NOT found (tolerance: 200 micron, 20 mrad)
track 8 SB: found, TS: NOT found (tolerance: 200 micron, 20 mrad)

VTX Info

sb8 seg 120199 tr 6506 pl 38 107075.5 69462.8 -24700 0.212 0.0943 sf1 seg 90596 tr 6753 pl 31 104828.8 68143.5 33800 0.126 -0.001 sb6 seg 110398 tr 6962 pl 29 104334.8 67893.3 36400 0.013 -0.166

sb6 & sf1 ip 5.3 at 104315 68145 -38186

sb6 & sb8 ip 73.3 at 104313 68164 -38300

sb8 & sf1 ip 70.7 at 104279 68148 -38434

vertex position... mean of those three 104302 68152 -38307

plate 28 at -37962... -345 microns upstream plate 28 (in good agreement what was seen on plate 28 - both tracks very close)