1072289
Jump to navigation
Jump to search
Back to Bern Bricks or OPERA
File:Event23180166.gif
Detector view
File:Event23180166 gen.gif
Detector view
General Informations
- Brick: 1072289 - Type: CC with 2 confirmed predictions
- Person: - Mic: - light level: value - cutoff 0: value - cutoff 1: value - Analysis Follower of the OPERA Experiment - Event Display PDF - Event Viewer
Predictions
Still obtained in non-automatic way: here
Loogbook
Start: on 22/07/08 at 10 o clock. (Ariga, Ciro, Igor, Tomoko & Frank)
- Took extracted CS predictions from the predictions on the wiki pagen , not directly from DB.
- Started calibration & search prediction for plates 57 to plate 36, started with 3 tracks, manual check succesfull with the 1st one (muon).
- Stopped at plate 48, continued with second calibration, but was ok, seems to be the real stopping point at plate 48.
- Made some important modifications in scan.C which we were in contact with Luca. Frank will write also to Luca and notificate him of some update in the ScanningTutorial to be made.
- Started then totalscanscript (after modification in thresholds in sysal)
Comments:
- Alignment: about 14 in the alignment peak.
- Grains: in avreage 24 Grains / BT
Some PLots
- Plots from TotalScan Volume (5x5mm2):
DB Publication
Substituted spaces by underscores in [http://lheppc46.unibe.ch/MICROSCOPE1/ONLINE/b072289/b072289.map.XG b072289.map.XG].
Make sure that in [http://lheppc46.unibe.ch/MICROSCOPE1/ONLINE/b072289/b072289.0.1.100.operation.h b072289.0.1.100.operation.h] file FROM_PLATE=57, TO_PLATE=45
Started @15:00
root [0] .L b072289.h
root [1] .L b072289.0.1.100.operation.h
root [2] .L LibScanToOracle7.C
root [3] #define MIC_NAME MIC1
root [4] #define USER KRESLO
root [5] Add()
root [6] AddHeaderOperation("Intercalibration")
root [7] DumpListOfHeaderOperations()
DumpListOfHeaderOperations started
Operation: 5000000001100008, start time: 24-JUL-08, notes:
Operation: 5000000001110004, start time: 24-JUL-08, notes: Intercalibration
DumpListOfHeaderOperations completed
Elapsed time = 0 seconds
(int)0
root [8] AddCalibrationOperation("5000000001110004")
...
AddCalibrationOperation completed
Elapsed time = 3953 seconds
(int)28
root [13] AddHeaderOperation("Scanback")
AddHeaderOperation started
AddHeaderOperation completed
Elapsed time = 1 seconds
(int)25
root [14] DumpListOfHeaderOperations()
DumpListOfHeaderOperations started
Operation: 5000000001100008, start time: 24-JUL-08, notes:
Operation: 5000000001110004, start time: 24-JUL-08, notes: Intercalibration
Operation: 5000000001130001, start time: 24-JUL-08, notes: Scanback
DumpListOfHeaderOperations completed
Elapsed time = 0 seconds
(int)0
root [15] AddPredictionOperation("5000000001130001","5000000001110004");
AddPredictionOperation started
GetEntries = 13 12
EdbScanSet:
Brick 72289 with 13 plates:
57 0.00 1.000000 0.000000 0.000000 1.000000 0.000000 0.000000
56 -1285.50 1.000000 0.000534 -0.000534 1.000000 -37.878155 17.525036
55 -2553.50 1.000000 -0.000020 0.000020 1.000000 -106.927460 -29.037109
54 -3831.94 0.999999 -0.000448 0.000448 0.999999 146.480820 -95.745857
53 -5131.94 0.999999 -0.000174 0.000174 0.999999 195.890625 -72.170227
52 -6416.17 1.000000 -0.000934 0.000934 1.000000 260.525024 -200.365875
51 -7692.82 0.999999 -0.002005 0.002005 0.999999 415.427887 -314.546295
50 -8961.33 1.000000 -0.001309 0.001309 1.000000 224.509995 -220.809540
49 -10239.93 1.000000 -0.000891 0.000891 1.000000 173.558960 -184.694183
48 -11504.97 1.000000 -0.000213 0.000213 1.000000 321.967590 -140.934967
47 -12804.97 1.000000 -0.000842 0.000842 1.000000 219.261688 -216.249115
46 -14090.57 0.999999 0.000728 -0.000728 0.999999 174.020233 -116.045219
45 -15350.22 0.999999 -0.000445 0.000445 0.999999 288.870178 -106.019646
for this brick 13 identifiers are defined:
72289 57 1 100
72289 56 1 100
72289 55 1 100
72289 54 1 100
72289 53 1 100
72289 52 1 100
72289 51 1 100
72289 50 1 100
72289 49 1 100
72289 48 1 100
72289 47 1 100
72289 46 1 100
72289 45 1 100
***
Copying plate 57
***
...
Copying plate 45
***
id calibration operation associate = 5000000001120023
id prediction operation = 5000000001130039
In plate 45 you have 0 predictions
AddPredictionOperation completed
Elapsed time = 23 seconds
AddVolumeOperation started
s->ID() 1 1 49
ReadPiecePar : ERROR open file: /terabig/scan/MICROSCOPE1/ONLINE/b072289/AFF/72289.56.1.1000_72289.55.1.1000.aff.par
Please run "Alignment" procedure first
GetEntries = 12 0
EdbScanSet:
Brick 72289 with 0 plates:
for this brick 12 identifiers are defined:
72289 56 1 1000
72289 55 1 1000
72289 54 1 1000
72289 53 1 1000
72289 52 1 1000
72289 51 1 1000
72289 50 1 1000
72289 49 1 1000
72289 48 1 1000
72289 47 1 1000
72289 46 1 1000
72289 45 1 1000
id volume = 5000000001130041
Error: Can't call TOracleServerE2W::AddProcessOperation(MIC_NAME,LIBSCAN_VOLUME,USER,id_header_operation,id_eventbrick,id_
plate,"1","NULL",date,date,"'Y'","Volume area") in current scope /terabig/fedra/macros/LibScanToOracle7.C:1068:
Possible candidates are...
(in TOracleServerE2W)
/terabig/fedra/lib/libEOracle.so -1:-1 0 public: Int_t TOracleServerE2W::AddProcessOperation(char* id_machine,char* id_
programsettings,char* id_requester,char* id_parent_operation,char* id_eventbrick,char* id_plate,char* driverlevel,char* id
_calibration,char* starttime,char* finishtime,char* success,char* notes);
(in TOracleServerE2)
(in TOracleServer)
(in TSQLServer)
*** Interpreter error recovered ***
root [24] .q
Copy AFF's by hands..... to include into scan.C! <---------------------------------------------------------------------------------TODO
scanner@lheppc46:/terabig/scan/MICROSCOPE1/ONLINE/b072289> cp AFF/72289.56.1.10
72289.56.1.100_72289.55.1.100.aff.par 72289.56.1.10_72289.55.1.10.aff.par
scanner@lheppc46:/terabig/scan/MICROSCOPE1/ONLINE/b072289> cp AFF/72289.56.1.10_72289.55.1.10.aff.par AFF/72289.56.1.1000_72289.55.1.1000.aff.par
scanner@lheppc46:/terabig/scan/MICROSCOPE1/ONLINE/b072289> cp AFF/72289.55.1.10_72289.54.1.10.aff.par AFF/72289.55.1.1000_72289.54.1.1000.aff.par
scanner@lheppc46:/terabig/scan/MICROSCOPE1/ONLINE/b072289> cp AFF/72289.54.1.10_72289.53.1.10.aff.par AFF/72289.54.1.1000_72289.53.1.1000.aff.par
scanner@lheppc46:/terabig/scan/MICROSCOPE1/ONLINE/b072289> cp AFF/72289.53.1.10_72289.52.1.10.aff.par AFF/72289.53.1.1000_72289.52.1.1000.aff.par
scanner@lheppc46:/terabig/scan/MICROSCOPE1/ONLINE/b072289> cp AFF/72289.52.1.10_72289.51.1.10.aff.par AFF/72289.52.1.1000_72289.51.1.1000.aff.par
scanner@lheppc46:/terabig/scan/MICROSCOPE1/ONLINE/b072289> cp AFF/72289.51.1.10_72289.50.1.10.aff.par AFF/72289.51.1.1000_72289.50.1.1000.aff.par
scanner@lheppc46:/terabig/scan/MICROSCOPE1/ONLINE/b072289> cp AFF/72289.50.1.10_72289.49.1.10.aff.par AFF/72289.50.1.1000_72289.49.1.1000.aff.par
scanner@lheppc46:/terabig/scan/MICROSCOPE1/ONLINE/b072289> cp AFF/72289.49.1.10_72289.48.1.10.aff.par AFF/72289.49.1.1000_72289.48.1.1000.aff.par
scanner@lheppc46:/terabig/scan/MICROSCOPE1/ONLINE/b072289> cp AFF/72289.48.1.10_72289.47.1.10.aff.par AFF/72289.48.1.1000_72289.47.1.1000.aff.par
scanner@lheppc46:/terabig/scan/MICROSCOPE1/ONLINE/b072289> cp AFF/72289.47.1.10_72289.46.1.10.aff.par AFF/72289.47.1.1000_72289.46.1.1000.aff.par
scanner@lheppc46:/terabig/scan/MICROSCOPE1/ONLINE/b072289> cp AFF/72289.46.1.10_72289.45.1.10.aff.par AFF/72289.46.1.1000_72289.45.1.1000.aff.par
scanner@lheppc46:/terabig/scan/MICROSCOPE1/ONLINE/b072289> cp AFF/72289.45.1.10_72289.44.1.10.aff.par AFF/72289.45.1.1000_72289.44.1.1000.aff.par
@16:30
Initialized...
root [12] DeleteOperation("5000000001130040") // To clean old remainders
DeleteOperation started
DeleteOperation completed
Elapsed time = 1 seconds
(int)25
root [13] AddHeaderOperation(
int AddHeaderOperation(const char* notes = "")
root [13] AddHeaderOperation("Totalscan1000")
AddHeaderOperation started
AddHeaderOperation completed
Elapsed time = 0 seconds
(int)25
root [14] DumpListOfHeaderOperations()
DumpListOfHeaderOperations started
Operation: 5000000001100008, start time: 24-JUL-08, notes:
Operation: 5000000001110004, start time: 24-JUL-08, notes: Intercalibration
Operation: 5000000001130001, start time: 24-JUL-08, notes: Scanback
Operation: 5000000001130042, start time: 24-JUL-08, notes: Totalscan1000
DumpListOfHeaderOperations completed
Elapsed time = 0 seconds
(int)0
root [15] AddVolumeOperation("5000000001130042","5000000001130001",1,1)
AddVolumeOperation started
s->ID() 1 1 49
GetEntries = 12 11
EdbScanSet:
Brick 72289 with 12 plates:
56 0.00 1.000000 0.000000 0.000000 1.000000 0.000000 0.000000
55 -1268.00 1.000000 -0.000554 0.000554 1.000000 -69.024437 -46.599014
54 -2546.44 0.999999 -0.000982 0.000982 0.999999 184.419464 -113.172440
53 -3846.44 0.999999 -0.000708 0.000708 0.999999 233.816666 -89.570427
52 -5130.67 0.999999 -0.001468 0.001468 0.999999 298.519531 -217.731567
51 -6407.32 0.999998 -0.002539 0.002539 0.999998 453.483368 -331.829254
50 -7675.83 0.999999 -0.001843 0.001843 0.999999 262.515442 -238.194458
49 -8954.43 1.000000 -0.001425 0.001425 1.000000 211.545120 -202.106308
48 -10219.47 1.000000 -0.000747 0.000747 1.000000 359.930389 -158.267838
47 -11519.47 0.999999 -0.001376 0.001376 0.999999 257.264679 -233.636841
46 -12805.07 1.000000 0.000194 -0.000194 1.000000 211.969711 -133.457092
45 -14064.72 0.999999 -0.000979 0.000979 0.999999 326.814301 -123.370193
for this brick 12 identifiers are defined:
72289 56 1 1000
72289 55 1 1000
72289 54 1 1000
72289 53 1 1000
72289 52 1 1000
72289 51 1 1000
72289 50 1 1000
72289 49 1 1000
72289 48 1 1000
72289 47 1 1000
72289 46 1 1000
72289 45 1 1000
id volume = 5000000001130043
***
Copying plate 56
***
id volume operation = 5000000001130044
id volume zone = 5000000001130045
...some time passed
***
Copying plate 45
***
id volume operation = 5000000001160005
id volume zone = 5000000001160006
Adding view 600/600
buffer 1/4: filling basetrack buffers... 33%
buffer 2/4: filling basetrack buffers... 66%
buffer 3/4: filling basetrack buffers... 100%
buffer 4/4: filling basetrack buffers... 100%
AddVolumeOperation completed
Elapsed time = 3522 seconds
(int)28
Similar for Totalscan - 1100 (1x1cm):
AddVolumeOperation("5000000001170001","5000000001130001",1,2)
...
AddVolumeOperation completed
Elapsed time = 14771 seconds
(int)29
Central DB communications
- Download predictions and create link to SB path as described here :
- In lheppc35 by SQL Developer connect to bern4 as OPERAPUB,
execute in SQLDeveloper the following command: call pp_download_predictions(3072289,'OPITA01'); commit; (press F5) Result: call pp_download_predictions(3072289,'OPITA01') succeeded. commit succeeded.
- Check it:
select * from tb_cs_candidates; Result: ID_EVENTBRICK ID_PROCESSOPERATION ID_EVENT CANDIDATE ID ---------------------- ---------------------- ---------------------- ---------------------- ---------------------- 3072289 9000000000723563 82000000000080277 1 9000000000724825 3072289 9000000000723563 82000000000080277 2 9000000000724826 2 rows selected
- Link CS candidate to SB operation:
INSERT INTO "OPERA"."TB_B_CSCANDS_SBPATHS" (ID_CS_EVENTBRICK, ID_CANDIDATE, ID_EVENTBRICK, ID_SCANBACK_PROCOPID, PATH) VALUES ('3072289', '9000000000724825', '1072289', '5000000001130001', '1');
Commit;
Here 3072289 - CS eventbrick (starts with 3!),
9000000000724825 - ID of CS candidate (see above)
1072289 - ID eventbrick (starts from 1)
5000000001130001 - id of scanback operation (get when execute AddHeaderOperation during publication procedure)
1 - ID of SB path (set in .operation.h file)
- Publication to central DB (OPFRA01)
In lheppc35 open C:\Documents and Settings\scanner\Desktop\DistributionExe_NET20\ExeRepository\OperaPublicationManager.exe
Brick geometry published with no problems IC - no problem. Durind SB publishing observed Oracle errror. After investigation with the help of Cristiano, some bug in OPFRA01 was fixed. Restarted SB publishing - done. TS zone 1000 publishing - finished. TS zone 1100 publishing - complete.
Brick publishing complete!